# WRL Cat Control Not Logging to WRL

**URL:** <https://community.worldradioleague.com/t/wrl-cat-control-not-logging-to-wrl/42935>\
**Category:** Bug Reports\
**Created:** [August 18, 2025, 8:30pm UTC](https://community.worldradioleague.com/t/wrl-cat-control-not-logging-to-wrl/42935 "2025-08-18T20:30:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![W2DIY](https://sea1.discourse-cdn.com/flex019/user_avatar/community.worldradioleague.com/w2diy/32/14641_2.png) [@W2DIY](https://community.worldradioleague.com/u/W2DIY)\
**Post date:** [August 18, 2025, 8:30pm UTC](https://community.worldradioleague.com/t/wrl-cat-control-not-logging-to-wrl/42935/1 "2025-08-18T20:30:28Z")

</div>

I don’t know if this is a bug, or operator error, but I noticed I lost my daily streak even though I have logged at least 1 QSO daily this week. After further inspection, I noticed that on 2 separate dates, my QSOs were not uploaded to WRL, but were uploaded to QRZ & LoTW.

I never close out of my CAT control, so it is always listening once I hop on the air. I currently have all of my QSOs routed to multiple locations through GridTracker (QRZ, LoTW & WRL)

I am not sure if there was something wrong on my end, or why the WRL CAT Control didn’t log the QSOs, but it logged everywhere else I have it setup to do so.

For now, I have just imported the missing QSOs from LoTW.

---

<div class="post-metadata">

**Author:** ![K4AZE](https://sea1.discourse-cdn.com/flex019/user_avatar/community.worldradioleague.com/k4aze/32/36274_2.png) [@K4AZE](https://community.worldradioleague.com/u/K4AZE)\
**Post date:** [August 19, 2025, 12:05pm UTC](https://community.worldradioleague.com/t/wrl-cat-control-not-logging-to-wrl/42935/2 "2025-08-19T12:05:14Z")

</div>

@W2DIY Hey Daniel,

We can take a look on our end but I would suggest disconnecting the radio when your not actively using it and then reconnecting it before getting on the air just to ensure there is no issues with the link between the cat control and your radio. This will be less of an issue when the desktop app launches as the cat control will be integrated natively into it.

Thanks & 73  
Brad K4AZE
